Methods for determining the stiffness properties of a helicopter main rotor blade based on computational experiments
https://doi.org/10.26467/2079-0619-2026-29-1-84-96
Abstract
Due to the widespread use of composite materials in the designs of helicopter main rotor blades (MRB), special attention should be paid to monitoring the obtained stiffness characteristics at all stages of their development and operation. The available experimental control methods have inherent limitations and can only be used at the late stages of blade development, as well as at the stage of mass production. This paper proposes the methods for determining the stiffness properties of a composite blade based on the results of a computational experiment, performed on the basis of the finite element method (FEM) in the MSC.Laminate Modeler submodule of the MSC.Patran/Nastran computing complex and numerical processing of the obtained deformations of the model blade suitable for use also during the design and development stages of the MRB. Numerical processing of the results is performed according to the ratios obtained as a result of the transition from the initial equations of bending and torsion of a cantilevered beam of variable cross-section, modeling the blade to their discrete matrix notation. For this purpose, the calculated sections are selected based on the blade length, the number and location of which depend on the features of its design. In this case, the values of the higher derivatives (curvature and relative twist angle) included in the specified equations are calculated by formulas representing their difference approximations. The proposed methods have been tested on the FEM MRB of the Mil-34 (NATO reporting name: Hermit) helicopter. The estimates of the quality of the coincidence of the calculated and experimental stiffness properties are obtained.
About the Authors
M. V. Kargaev
Moscow Aviation Institute (National Research University) ; National Helicopter Center Mil&Kamov
Russian Federation
Russian Federation
Maksim V. Kargaev, Candidate of Technical Sciences, Associate Professor, Design and Certification of Aviation Equipment Chair, the Head of group
Moscow; Tomilino
I. S. Solodilov
National Helicopter Center Mil&Kamov
Russian Federation
Russian Federation
Ilya S. Solodilov, Chief Specialist
Tomilino
References
1. Bokhoeva, L.A., Pnev, A.G. (2011). Selection and justification of the optimal technology for manufacturing helicopter blades from composite materials. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroyeniye, no. 5, pp. 37–42. (in Russian)
2. Arepev, A.N., Gromov, M.S., Shapkin, V.S. (2002). Issues of operational survivability of aircraft structures. Moscow: Vozdushnyy transport, 424 p. (in Russian)
3. Johnson, W. (2013). Rotorcraft Aeromechanics. NY.: Cambridge University Press, 927 p.
4. Richard, L.B. (2006). Rotary wing structural dynamics and aeroelasticity. 2nd ed. AIAA, Washington, 584 p. DOI: 10.2514/4.862373
5. Kargaev, M.V. (2024). Blade coupled flexural-and-torsional vibrations computing while the helicopter main rotor spin-up and deceleration under wind conditions. Aerospace MAI Journal, vol. 31, no. 4, pp. 101–112. (in Russian)
6. Amir’yants, G.A., Malyutin, V.A. (2018). On experimental determination of aircraft structures stiffness characteristics. Trudy MAI, no. 103, 29 p. Available at: https://Trudymai.ru/upload/iblock/88e/Amiryants_Malyutin_rus.pdf?lang=ru&issue=103 (accessed: 09.06.2025). (in Russian)
7. Ishmuratov, F.Z., Malyutin, V.A., Naiko, Yu.A. (2013). Calculation scheme of a large elongation wing based on the results of stiffness tests. Trudy TsAGI, vol. 2738, pp. 171–182. (in Russian)
8. Malyutin, V.A., Mamedov, O.S., Popovskiy, V.N., Frolov, A.V. (2023). Estimation of errors in the determined beam bending stiffness of aircraft structures for applied experimental methods. Trudy TsAGI, vol. 2815, pp. 3–15. (in Russian)
9. Kostin, V.A., Valitova, N.L., Filyasova, V.I. (2024). On one approach to the wing rigidity determining by specified deformations. Aerospace MAI Journal, vol. 31, no. 4, pp. 123–130. (in Russian)
10. Kamenev, S.V. (2019). Fundamentals of the finite element method in engineering applications: Tutorial. Orenburg: OGU, 110 p. (in Russian)
11. Moaveni, S. (2015). Finite element analysis: Theory and application with ANSYS. 4th ed. Harlow, Pearson Education Limited, 929 p.
12. Oñate, E. (2013). Structural analysis with the finite element method. linear statics. Volume 2: Beams, Plates and Shells. Heidelberg, Springer Netherlands, 864 p.
13. Trivailo, P., Dulikravich, S.D., Sgarioto, D., Gilbert, T. (2006). Inverse problem of aircraft structural parameter estimation: application of neural networks. Inverse Problem in Science and Engineering, vol. 14, no. 4, pp. 351–363. DOI: 10.1080/17415970600573411
14. Shi, F. (2024). Combining finite element simulation to analyse the viscoelastic mechanical inverse problem of asphalt pavement. Archives Des Sciences, vol. 74, no. 4, pp. 57–66. DOI: 10.62227/as/74409
15. Kurchenko, N.S., Alekseytsev, A.V. (2023). Identification of force loads on a bearing system using neural network technologies. Engineering Journal of Don, no. 9 (105), pp. 258–267. (in Russian)
16. Skvorcov, U.V., Glushkov, S.V., Hromov, A.I. (2012). Modeling of composite structural elements and analysis of their failure in CAE systems MSC.Patran-Nastran and ANSYS: Tutorial. Samara: Izdatelstvo SGAU, 148 p. (in Russian)
17. Vermel, V.D. (2021). Fundamentals of computational (engineering) geometry. Moscow: Innovatsionnoye mashinostroyeniye, 352 p. (in Russian)
18. Kargaev, M.V. (2019). Stresses computing in the main rotor blade based on the nonlinear loading model under static wind impact. Aerospace MAI Journal, vol. 26, no. 2, pp. 34–42. (in Russian)
19. Feodosev, V.I. (2016). Resistance of materials. 16th ed. Moscow: Izdatelstvo MGTU im. N.E. Baumana, 544 p. (in Russian)
20. Turtygin V.S. (2015). Digital Signal Processing: Lab Workshop. St. Petersburg: Izdatelstvo Politekhnicheskogo universiteta, 116 p. (in Russian)
Review
For citations:
Kargaev M.V., Solodilov I.S. Methods for determining the stiffness properties of a helicopter main rotor blade based on computational experiments. Civil Aviation High Technologies. 2026;29(1):84-96. (In Russ.) https://doi.org/10.26467/2079-0619-2026-29-1-84-96
Views:
219
JATS XML
Email this article 
