Preview

Civil Aviation High Technologies

Advanced search

INFLUENCE OF FAILURE-FREE OPERATION LEVEL ON COSTS RELATED TO PRODUCTION AND GUARANTEE SERVICE OF INNOVATIVE PRODUCTS

https://doi.org/10.26467/2079-0619-2018-21-3-115-124

Abstract

Basis of market of national consumption is presently formed by non-redundant products. Reliability of these devices is wholly determined by the level of failure-free operation of their constituents. With the industrial products of the non-domestic use redundancy both in the repaired and non-repaired equipment is used on different levels: redundancy at the level of components, blocks and units on the whole, and also at the level of elements (deep fractional redundancy).To make a forecast on the share of products that fail during operation, one can know the probability of failure-free operation of the product for a certain time. The article gives the indicator of the probability of failure-free operation of the product – a quantifiable estimated value, which is calculated as the ratio of the undisclosed number of products to their total number. The graph characterizing the changes in the probability of failure-free operation of the products is given. It is assumed that the probability of failure-free operation of articles varies exponentially. The construction of an economic model based on the category of fail-safe products is considered. This model is built taking into account the condition that the product guarantees issued by the manufacturer should be correlated with the number of possible failures of the products during this time. The conclusion is made that the product reliability category is the only category of risk assessment of the manufacturer on the market when issuing guarantees for its products. The assumption is made that the price of improving the reliability can be different and depends on many circumstances, but always increase of the product reliability is associated with an increase of its cost. The problem is solved, due to the fact that some of the products supplied by the manufacturer to the market will fail. Thus, it is necessary to know the proportion of failed products, which is determined by the quality of manufacture and reliability of the product put in the process of its design and production. The graph of the dependence of the total costs for the production and operation of innovative products on the probability of their trouble-free operation is given. The main advantages of the proposed economic model are formulated.

About the Authors

I. M. Ter-Saakova
Riga Aviation Institute
Latvia
Candidate of Technical Sciences, Associate Professor


N. I. Podalyakina
Riga Aviation Institute
Latvia
Candidate of Technical Sciences, Associate Professor


V. A. Khodakovsky
Riga Aviation Institute
Latvia
Doctor of Technical Sciences, Professor


References

1. Pavlov, I.V. (1982). Statisticheskie metody ocenki nadyozhnosti slozhnyx sistem po rezultatam ispytanij [Statistical methods for assessing the reliability of complex systems based on test results]. Moscow: Radio and Communication, 168 р. (in Russian)

2. Ushakov, I.A. (1999). Handbook of Reliability Engineering. New York: John Wiley.

3. Severtsev, N.A. (2013). Bezopasnost i otkazoustojchivost dinamicheskix sistem [Security and fault tolerance of dynamic systems]. Moscow: Culture and Technology, 420 р. (in Russian)

4. Severtsev, N.A. (2014). Bezopasnost i zashhita slozhnyx sistem [Security and protection of complex systems]. Moscow, 238 р. (in Russian)

5. Zatuchny, D.A. (2009). Ocenka nadyozhnosti sistemy peredachi videoinformacii [Evaluation of the reliability of the video transmission system]. Journal of Electrosvyaz, no. 4, pp. 32–34. (in Russian).

6. Zatuchny, D.A. and Kolodiy, P.P. (2008). Vychislenie nadyozhnosti videosistem na osnove postroeniya dopolnitelnyx struktur [Calculation of reliability of video systems based on the construction of additional structures]. Scientific Bulletin of the Moscow State Technical University of Civil Aviation, series "Navigation and ATC", no. 136, pp. 126–130.

7. Zatuchny, D.A. (2013). Ocenka veroyatnosti bezotkaznoj raboty pri peredache informacii [Estimation of the probability of failure-free operation in the transmission of information]. Scientific Bulletin of the Moscow State Technical University of Civil Aviation, no. 198, pp. 88–90. (in Russian)

8. Pavlov, I.V. and Razgulyaev, S.V. (2015). Asimptoticheskie ocenki nadyozhnosti sistemy s rezervirovaniem raznotipnymi ehlementami [Asymptotic estimates of the reliability of the system with redundancy of different types of elements]. Engineering Journal: Science and Innovation, № 38(2), p. 5. (in Russian)

9. Pavlov, I.V. (2015). Nizhnyaya ocenka nadyozhnosti po rezul'tatam uskorennyh ispytanij [Lower reliability score based on accelerated test results]. Problems of machine building and machine reliability, no. 3, рр. 80–86. (in Russian)

10. Pavlov, I.V. (2017). Doveritel'nye granicy dlya pokazatelej nadyozhnosti sistemy s vozrastayushchej funkciej intensivnosti otkazov [Confidence limits for reliability indicators of the system with increasing function of failure rate]. Problems of machine building and machine reliability, no. 2, pр. 70–75. (in Russian)

11. Pavlov, I.V. (2017). Ocenka nadyozhnosti sistemy s rezervirovaniem po rezul'tatam ispytanij eyo ehlementov [Evaluation of the reliability of the system with redundancy based on the test results of its elements]. Automation and telemechanics, no. 3, pр. 149–158. (in Russian)

12. Pavlov, I.V. and Razgulyaev, S.V. (2015). Postroenie doveritel'nyh granic dlya koehfficienta gotovnosti sistemy s vosstanavlivaemymi ehlementami [Creation of confidence limits for the system availability factor with the elements to be restored]. Bulletin of the Moscow State Technical University named after N.E. Bauman. Series: Natural Sciences, no. 61(4), pр. 15–22. (in Russian)


Review

For citations:


Ter-Saakova I.M., Podalyakina N.I., Khodakovsky V.A. INFLUENCE OF FAILURE-FREE OPERATION LEVEL ON COSTS RELATED TO PRODUCTION AND GUARANTEE SERVICE OF INNOVATIVE PRODUCTS. Civil Aviation High Technologies. 2018;21(3):115-124. (In Russ.) https://doi.org/10.26467/2079-0619-2018-21-3-115-124

Views: 610


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2079-0619 (Print)
ISSN 2542-0119 (Online)