DYNAMIC LOAD OF THE THIN CONICAL RADOME WITH A CONSIDERATION OF ATTACHED ADDITIONAL MASS
Abstract
At the present stage of aviation and missile equipment development there is increasing necessity for considering fast-acting, high-speed processes of impact interaction of structure elements with external loads, represented as both power factors (longitudinal force or bending moment) and uniformly spread aerodynamic pressure. The article analyses the dy- namic behavior of the nonuniformly-heated thin conical rotational shell, modelling the aircraft heat shield, under pressure wave loading in a gaseous environment. Stress-strain shell behavior caused by preliminary uneven heating is determined by solving thermo elastic equilibrium equations. The temperature field can be specified as any functional dependence in both circumferential and longitudinal coordinates of a thin-walled axisymmetric shell. The solution of the dynamic problem is obtained by the integration of shell and attached mass motion nonlinear equations under predetermined initial displace- ments, zero initial rates, and boundary conditions appropriate for heat shield fixation. The work presents simultaneous equations solution in the form of time dependent behavior from the beginning of front external pressure impact for dis- placements and stresses in thin-walled structures. The dependent behavior for various shell designs is presented taking into account the changes of shell thickness and attached mass. It is shown that the initial conditions of non-uniform shell heating cause leading-edge deflection comparable in size to the magnitude of the displacements from its free oscillations. However the values of stresses in a shell for its fixation area are more dependent on its thickness, than on the magnitude of the at- tached mass.
About the Authors
I. K. Turkin
Moscow State Aviation Institute
Russian Federation
Russian Federation
Doctor of Technical Science, Professor, Head of the Aviation & Rocket Systems Chair,
Moscow
D. A. Rogov
ORPE “Technologiya” named after A.G. Romashin
Russian Federation
Russian Federation
Postgraduate Student of Moscow Aviation Institute (National Research University), Head of Department of Evaluation of the Strength and Reliability of Structures,
Obninsk, Kaluga rgn.
References
1. Tekinalp O., Cavus N. Multiobjective Conceptual Design of an Unmanned Combat Air Vehicle. Proceedings of 12th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference and 14th AIAA/ISSM. Indianapolis. Indiana. 17–19 September 2012. pp. 146–158.
2. Volkind D.K., Rogov D.A. Napryazhenno-deformirovannoe sostoyanie obtekatelya vysokosrorostnogo LA [The stress-strain state of the fairing of high-speed aircraft]. [Proceedings of the user conference “ANSYS 2013”. Moscow. 15–17 June. 2013]. Moscow, 2013, pp. 78–80. (in Russian)
3. Grigolyuk E.N., Gorshkov A.G. Nestatsionarnaya gidrouprugost’ obolochek [Nonstationary hydro-elasticity of shells]. Leningrad, Shipbuilding Publ., 1974, 208 p. (in Russian)
4. Kabanov V.V. Ustoychivost’ tsilindricheskoy obolochki pri szhatii, bokovom davlenii i nagreve. [Stability of cylindrical shell under compression, side pressure and thermal loads]. Teplovye nagruzheniya v elementakh konstruktsii [Thermal loading in construction elements]. Vol. 4. Kiev, Naukova dumka, 1974, pp. 129–132. (in Russian)
5. Turkin I.K. Dinamicheskaya ustoychivost podkreplennoy cilindricheskoy obolochki pri termosilovom nagruzhenii [The dynamic buckling of reinforced shell under synchronous thermal-force loading]. Tezisy dokladov IV vsesoyuznoy konferencii «Sovremennye problemy stroitel’noy mehaniki i prochnostey LA» [Proceedings of IV All-Union Conference “Modern Problems of Structural Mechanics and strength of the aircrafts”]. Khar’kov, 1991, p. 75. (in Russian)
6. Turkin I.K. Proektirovanie tonkostennyh konstruktsiy LA, funkcioniruyushih v ekstremal’nyh usloviyah [The designing of thin-walled construction, functioning under extremal condition]. Moscow, MAI Publ., 2000, 304 p.
7. Turkin I.K., Rogov D.A. Issledovanie dinamicheskogo povedeniya konicheskogo obtekatelya LA pri slozhnom termosilovom nagruzhenii [Study of the aircraft conical radome dynamic behavior under combined application of temperature and force]. Civil Aviation High Technologies, 2016, no. 225, pp. 166–172. (in Russian)
8. Chernova N.D. Reaktsiya konicheskoy obolochki na deystvie podvizhnoy nagruzki s uchetom predvaritelnogo nagreva [Conical dome response to moving load impact with preheating token into account]. State Department VINITI. 1983. No. 917–83. (in Russian)
9. Turkin I.K. Dinamicheskoe povedenie tonkostennoy konicheskoy obolochki LA pod deystviyem udarnoy volny I neravnomernogo nagreva [The aircraft conical thin-walled dome dynamic behavior under combined application of irregular temperature and rapid-action pressure wave]. Materialy XXI mezhdunarodnogo simposiuma “Dinamicheskie I tehnologicheskie problem mehaniki konstruktsii I sploshnyh sred” [Proceedings of the XXI international Symposium "Dynamic and technological problems of mechanics of constructions and continuous media" named after A.G. Gorshkova]. Moscow, 2015, pp. 79–83. (in Russian)
10. Kiryushina V.V., Fetisov V.S., Kovalenko P.V. Ocenka prochnostnoy nadezhnosti golovnogo obtekatelya LA iz steklokeramiki v seriynom proizvodstve [Assessing the strength reliability of the head fairing of aircraft made of glass-ceramic in condition of mass production] Materialy XXI mezhdunarodnoy nauchno-tehnicheskoy konferencii “Konstrukcii I tehnologii polucheniya izdeliy iz nemetalicheskih materialov, [Proceedings of the XXI international scientific-technical conference "Design and technology of obtaining products of non-metallic materials"]. Obninsk. 5–7 October 2016. (in Russian)
Review
For citations:
Turkin I.K., Rogov D.A. DYNAMIC LOAD OF THE THIN CONICAL RADOME WITH A CONSIDERATION OF ATTACHED ADDITIONAL MASS. Civil Aviation High Technologies. 2017;20(3):122-130. (In Russ.)
Views:
456
Email this article 
