FEATURES OF MODELING THE FLOW AROUND THE HELICOPTER MAIN ROTOR TAKING INTO ACCOUNT ARBITRARY BLADES MOTION

The article considers the problem of the flow around the helicopter main rotor taking into account blades flapping in the plane of rotation and in the plane of thrust as well as the elastic blades deformation. The rotor rotation is modeled by the method of converting Navier-Stokes equations from a fixed coordinate system associated with the incoming flow into a rotating system associated with the rotor hub. For axial flow problems, this makes it possible to formulate the problem as stationary at a constant rotational speed of rotor. For a mode of skewed flow around the rotor in the terms of incident flow in this system it is necessary to solve the non-stationary problem. To solve the problem, the method of deformable grids is used, in which the equations are copied taking into account the grid nodes motion determined in accordance with the spatial blades motion, and SST turbulence model is used for closure. The results of the test calculations of the main rotor aerodynamic characteristics with and without blade flapping are presented in this paper. The coefficients of the main rotor thrust cT and the blades hinge moments mh are compared. The calculations were carried out in the CFD software ANSYS CFX (TsAGI License No. 501024). The flow around a four-bladed main rotor of a radius of 2.5 meters is modeled in the regime of skewed flow. The speed of the incoming flow came to 85 m/s under normal atmospheric conditions. The rotor was at an angle of attack of −10˚. To calculate the rotor motion without taking into account the flapping movements, we used the nonstationary system of Navier-Stokes equations with the closure with SST turbulence model. The calculation was being carried out until the change in the maximum value of the rotor thrust during one revolution became less than 1%. For modeling flapping blade movements, the control laws and equations describing the angle of blade flapping as a function from its azimuth angle obtained from the experiment were used. The procedure for reconstructing the grid according to a given law was conducted using standard grid deformation methods presented in the ANSYS CFX software. When solving the nonstationary Navier-Stokes equations, a dual time step was used. The obtained results show that accounting of the effect of flapping movements and cyclic control of the blades has an impact on the character of changing the main rotor thrust coefficient during one revolution and significantly changes the shape of the graph of the hinge moment coefficient of each blade.

SolidWorks, CAD, ANSYS CFX

1. Belotserkovsky, S.M., Loktev, B.E. and Nisht, M.I. (1992). Issledovaniye na EVM aerodinamicheskikh i aerouprugikh kharakteristik vintov vertoleta [A computer study of the helicopter rotors aerodynamic and aeroelastic characteristics]. Moscow: Mashinostroeniye, 220 p. (in Russian)

2. Aparinov, A.A. (2017). O vozmozhnosti primeneniya splaynov dlya differentsirovaniya poley skorostey v vikhrevykh metodakh [On the possibility of using splines for the differentiation of velocity fields in vortex methods]. Materialy XXVIII Nauchno-tekhnicheskoy konferentsii po aerodinamike, p. Volodarskogo, 20–21 aprelya 2017 g. [Proceedings of XXVIII Scientific and Technical Conference on Aerodynamics, settl. Volodarskiy, April 20–21, 2017], pp. 43–44. (in Russian)

3. Kochish, S.I. and Komkov, V.S. (2017). Raschet aerodinamicheskikh kharakteristik kombinatsiy nesushchikh vintov s tolkayushchimi (tyanushchimi) vintami v koltse perspektivnogo skorostnogo vertoleta v obshchem sluchaye dvizheniya [Aerodynamic characteristics computation of combinations of main rotors with pusher propellers in the ring of a perspective high-speed helicopter in the general case of motion]. Materialy XXVIII Nauchno-tekhnicheskoy konferentsii po aerodinamike, p. Volodarskogo, 20–21 aprelya 2017 [Proceedings of XXVIII Scientific and Technical Conference on Aerodynamics, settl. Volodarskiy, April 20–21, 2017], pp. 153–154. (in Russian)

4. Ignatkin, Yu.M., Makeev, P.V. and Shomov, A.I. (2015). Interferentsiya nesushchego i rulevogo vintov vertoleta pri polete so skolzheniyem [Interference of the helicopter main rotor and the tail rotor in flight with glide]. Trudy MAI [The MAI Proceedings], no. 82, p. 11. (in Russian)

5. Ridhwan, N.A. Mohd, N. and Barakos, G.N. (2012). Computational aerodynamics of hovering helicopter rotors. Jurnal Mekanikal, no. 34, pp. 16–46.

6. Garipova, L.I., Batrakov, A.S., Kusyumov, A.N., Mikhailov, S.A. and Barakos, G.N. (2014). Estimates of hover aerodynamics performance of rotor model. Russian Aeronautics, vol. 57, no. 3, pp. 223–231.

7. Garcia, A.J. and Barakos, G.N. (2016). Hover predictions on the S-76 rotor using HMB2. 53rd AIAA Aerospace Sciences Meeting, 2 Jan.

8. Kusyumov, A.N., Mikhailov, S.A., Garipova, L.I., Batrakov, A.S. and Barakos, G. (2015). Prediction of helicopter rotor noise in hover. EPJ Web of Conferences. DOI: 10.1051/epjconf/ 20159202042

9. Abalakin, I.V., Bakhvalov, P.A., Bobkov, V.G., Gorobets, A.V., Kozubskaya, T.K. and Anikin, V.A. (2018). O chislennom modelirovanii aerodinamicheskikh i akusticheskikh kharakteristik vinta vertoleta [On the numerical simulation of the aerodynamic and acoustic characteristics of a helicopter rotor]. Materialy XXIX Nauchno-tekhnicheskoy konferentsii po aerodinamike, d. Bogdanikha, 01–02 marta 2018 g. [Proceedings of XXIX Scientific and Technical Conference on Aerodynamics, vil. Bogdanikha, March 01–02, 2018], p. 15. (in Russian)

10. Vershkov, V.A. (2019). Algoritm deformatsii setki dlya ucheta tsiklicheskogo upravleniya i mahkovihk dvizheniy lopastey v zadache obtekaniya nesushchego vinta vertoleta [The algorithm of mesh deformation for accounting cyclic blade control and blades flapping in the problem of helicopter main rotor modeling]. Civil Aviation High Technologies, vol. 22, no. 2, pр. 62–74. (in Russian)