ALGORITHM OF MESH DEFORMATION FOR ACCOUNTING CYCLIC BLADE CONTROL AND BLADES FLAPPING IN THE PROBLEM OF HELICOPTER MAIN ROTOR MODELING
https://doi.org/10.26467/2079-0619-2019-22-2-62-74
Abstract
This paper presents the developed algorithm for numerical grid deformation for solving the problems of modeling the flow around the helicopter main rotor in the horizontal flight mode with allowance for flapping movements and cyclic changes in the angle of the blade installation. In general, this algorithm can be applied to simulate the aerodynamics of solid bodies deviating from its initial position at angles up to 90 degrees in the vertical and horizontal planes relative to the origin point, and also performing a rotational motion at an angle up to 90 degrees around the axis through the center of coordinates and the body mass center. The first part provides a brief overview of the existing methods of the computational grid deformation for solving various problems of numerical simulation. These include methods for rebuilding the grid, moving grids and "Chimera" grids. The second part describes the algorithms for allocating of grid deformation and for finding the final coordinate of the computational grid nodes in the presence of a predetermined blade control law. The equations of the deformation zones shape in numerical grid are given. The influence of variables on zones sizes is shown. The third part presents the results of methodological calculations confirming the performance and limitations when choosing mesh deformation zones. The influence of the size and shape of the deformation zones of the numerical grid on the quality of the mesh elements is also shown. This work is methodical in nature and is a preliminary stage in the numerical modeling of the flow around the helicopter main rotor taking into account the automatic main rotor balancing and blades flapping.
About the Author
V. A. Vershkov
Central Aerohydrodynamic Institute
Russian Federation
Russian Federation
Vladislav A. Vershkov, Junior Research Fellow of Scientific and Research Department No 5 of Central Aerohydrodynamic Institute, Postgraduate of the Moscow Institute of Physics and Technology (State University)
Zhukovsky
References
1. Jothiprasad, G., Mavriplis, D.J. and Caughey, D.A. (2003). Higher-order time integration schemes for the unsteady Navier-Stokes equations on unstructured meshes. Journal of Computational Physics, vol. 191, iss. 2, Nov., pp. 542–566.
2. Yang, Zhi and Mavriplis, D.J. (2007). Higher-order time integration schemes for aeroelastic applications on unstructured meshes. AIAA Journal, vol. 45, no. 1, Jan., pp. 138–150.
3. Mavriplis, D.J. (1996). Mesh generation and adaptivity for complex geometries and flows. In: Peyret R. Handbook of Computational Fluid Mechanics. Elsevier Science & Technology Books, pp. 417–459.
4. Batina, J.T. (1990). Unsteady Euler airfoil solutions using unstructured dynamic meshes. AIAA Journal, vol. 28, no. 8, Aug., pp. 1381–1388.
5. Cizmas, P. and Gargoloff, J.I. (2008). Mesh generation and deformation algorithm for aeroelastic simulations. Journal of Aircraft, vol. 45, no. 3, May, pp. 1062–1066.
6. Duvigneau, R. and Visonneau, M. (2001). Shape optimization of incompressible and turbulent flows using the simplex method. 15th AIAA Computational Fluid Dynamics Conference, number AIAA 2001-2533, Reston, Virigina, 11–14 June 2001. American Institute of Aeronautics & Astronautics.
7. Farhat, C., Degand, C., Koobus, B. and Lesoinne, M. (1998). An improved method of spring analogy for dynamic unstructured fluid meshes. 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, AIAA 1998–2070, 20–23 April 1998.
8. Gordon, W.J. and Thiel, L.C. (1982). Transfinite mappings and their application to grid generation. Applied Mathematics and Computation, vol. 10–11, Jan., pp. 171–233.
9. Buhmann, M.D. (2003). Radial basis functions: theory and implementations. New York: Cambridge University Press.
10. Wendland, H. (2004). Scattered Data Approximation. Cambridge: Cambridge University Press.
11. Allen, C.B. and Rendall, T.C.S. (2007). Unified Approach to CFD-CSD interpolation and mesh motion using radial basis functions. 25th AIAA Applied Aerodynamics Conference, AIAA 2007–3804, 25–28 June 2007.
12. Rendall, T.C.S. and Allen, C.B. (2008). Unified fluid-structure interpolation and mesh motion using radial basis functions. International Journal for Numerical Methods in Engineering, vol. 74, no. 10, pp. 1519–1559.
13. Ling, L. and Schaback, R. (2008). Stable and Convergent unsymmetric meshless collocation methods. SIAM Journal on Numerical Analysis, vol. 46, no. 3, pp. 1097–1115.
14. Lee, T., Leok, M. and McClamroch, N.H. (2011). Geometric numerical integration for complex dynamics of tethered spacecraft. Proceedings of the 2011 American Control Conference, March, pp. 1885–1891.
15. Sarra, S.A. and Kansa, E.J. (2009). Multiquadric radial basis function approximation methods for the numerical solution of partial differential equations, 206 p.
16. Freitag, L.A. (1997). On combining laplacian and optimization-based smoothing techniques. Proc. Symp. Trends in Unstructured Mesh Generation, Jun, pp. 37–44.
17. Dougherty, F.C., Benek, J.A. and Steger, J.L. (1985). On applications of chimera grid schemes to store separation. National Aeronautics and Space Administration, Ames Research Center, Moffett Field, 14 p.
18. Meakin, R. (1997). On adaptive refinement and overset structured grids. 13th Computational Fluid Dynamics Conference, AIAA 1997-1858, Jun, pp. 236–249.
19. Renzoni, P., D’Alascio, A., Kroll, N., Peshkin, D., Hounjet, M.H.L., Boniface, J.-C., Vigevano, L., Allen, C.B., Badcock, K., Mottura, L., Scholl, E. and Kokkalis, A. (2000). EROS a common European Euler code for the analysis of the helicopter rotor flowfield. Progress in Aerospace Sciences, vol. 36, no. 5–6, pp. 437– 485.
20. Pomin, H. and Wagner, S. (2004). Aeroelastic analysis of helicopter rotor blades on deformable chimera grids. Journal of Aircraft, vol. 41, no. 3, May-June, pp. 577–584.
21. Rumsey, C.L. (1997). Computation of acoustic waves through sliding-zone interfaces. AIAA Journal, vol. 35, no. 2, Feb., pp. 263–268.
22. Steijl, R. and Barakos, G. (2008). Sliding mesh algorithm for CFD analysis of helicopter rotor-fuselage aerodynamics. International Journal for Numerical Methods in Fluids, vol. 58, no. 5, Oct., pp. 527–549.
23. Fenwick, C.L. and Allen, C.B. (2006). Development and validation of sliding and non-matching grid technology for control surface representation. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 220, iss. 4, Jan., pp. 299–315.
Review
For citations:
Vershkov V.A. ALGORITHM OF MESH DEFORMATION FOR ACCOUNTING CYCLIC BLADE CONTROL AND BLADES FLAPPING IN THE PROBLEM OF HELICOPTER MAIN ROTOR MODELING. Civil Aviation High Technologies. 2019;22(2):62-74. (In Russ.) https://doi.org/10.26467/2079-0619-2019-22-2-62-74
Views:
818
Email this article 
